|
|
Air heating units LEO Plastic are designed for large cubature. The device uses heating water and gives power of 30 or 50 kW. Heat exchanger is build from copper pipes covered with aluminium. The casing is made out of plastic of high durability and thermal resistance. Maximal temperature for water is 90 degrees with pressure of 1,6 MPa
We sell two versions of this device:
• LEO PLASTIC S - standard version,
• LEO PLASTIC M - with modulated voltage and regulator of rotor speed.
| Parameters |
LEO PLASTIC 30 |
LEO PLASTIC 50 |
| Numbers of rows in heater |
|
1 |
2 |
| Maximum discharge |
m³/h |
4200 |
3800 |
| Range of heating power |
kW |
28,7 |
52,7 |
| Temperature rise* |
°C |
18,9 |
39,5 |
| Maximum temperature of heating agent |
°C |
95 |
| Maximum operating pressure |
MPa |
1,6 |
| Maximum range of air |
m |
25 |
| Water capacity |
dm³ |
X |
| Diameter of mounting connectors |
" |
3/4 |
| Mass including water |
kg |
20 |
21,4 |
| Supply voltage |
V/Hz |
1 x 230/50 |
| Motor power |
kW |
0,28 |
| Rated current |
A |
1,22 |
| Motor revolutions |
obr./min |
X |
| Motor IP |
|
54 |
|
