The system is based on connecting coiled pipes with a dedicated joint set (2 collars + connecting clip) with which it is possible to install or disassemble systems without interfering with the ventilation system.
Pipes in the system are joined without threaded connectors. Instead, both ends of the pipe are fitted with collars (either screwed or pressed) connected together with a clip ring.
When partial disassembly of system is necessary, it is enough to open two clip rings to easily remove a defective component, e.g. a coiled pipe.
Product characteristics:
• speedy installation
• simple assembly
• fully reliable connection
• removal of individual pipes from system possible
• standard sizes
• adequate collar metal thickness (0,8 to 1,2 mm)
Set: 2 x gasket + joint ring.
